4.Carefully slide the panel out. You will find the reverse side is white. For units with white panels showing, the reverse side will be black.
5.Choose the color you want to show and carefully slide the panel back into the door. NOTE: Be careful not to scratch the panel as it is inserted.
6.Replace the handle insert and tighten the screws in both side trim pieces. Replace the handle and the screws.
NOTE: You can make a decorative wood front to match existing cabinets. The panel should be l/4” (6 mm) thick and 17” x 11 ‘/4”
(433 mm x 286 mm). Remove the color panel and break off the ribs on the door insulation to allow for wood thickness.
Changingthe loweraccess panel
1 | Electrical Shock Hazard | . | 1 |
Do not operate ice maker with lower access panel or control panel removed. Electncal shock or personal injury could result.
1. Remove the two screws in the bottom grille area.
4 | I0 | 2. Remove the two screws from the top panel trim |
and remove the top trim. |
5
