IY Thumb screws (long)
.
Drain I
P’KI
Cleaning the ice maker system -
Personal Injury Hazard
Most ice machine cleaners are citric or phosphoric acid which can cause irritation even after dilution. In case of contact with eyes, flush eyes thoroughly with fresh water and contact a physician immediately. In case of contact with skin, rinse well with water. If swallowed, give large amounts of water and contact a physician immediately. Do not induce vomiting. KEEP OUT OF REACH OF CHILDREN.
1.Turn the Cycle Control Knob to “OFF.”
2.Remove the two thumb screws and slide the ice cutter grid forward, out of the two slots near the water pan.
3.Unplug the electrical harness.
Any ice on the grid should be melted under running warm water. Attempting to pick the ice slab off the grid may stretch and damage
1arid wires.
4.Remove all ice from the storage bin and the freezing plate.
5.Drain the water pan by removing the drain plug and then replace the plug.
9
