Changing the light bulb...
..r.: ?I/,.,,Ilil”H,11.,,6 1 |
Moving the meat drawer
PULL OUT TO THE STOP. LIFT THE FRONT AND PUL
1.Reach behind the control console to find bulb.
2.Remove bulb.
3.Replace with a
., ., ,/:.. .,. 1* ., I .. *j
and cover... T
o remove the meat drawer:
1.Slide meat drawer out to the stop.
2.Lift the front of meat drawer.
3.Slide drawer the rest of the way out.
4.Replace in reverse order.
To remove the cover:
1.Tilt front of cover up, lift at back, and pull straight out.
2.Replace in reverse order.
Shelves can be adjusted to match the way you use To remove the shelves:
your refrigerator.1. Tilt up at front. 2. Lifi up at back.
3. Pull shelf straight out. To replace the shelves:
1. Guide the rear hooks into the slots in the shelf supports.
2. Tilt up front of shelf until hooks drop into slot. Lower front of shelf to level position.
PULL OUT TO THE STOP. LlFl THE
,,., FRONT AND PULL AGAIN.
BE CAREFUL.
REMOVE THE
GLASS INSERT, \
LIFT THE FRAME FRONT,
THEN THE BACK.
To remove the crispers:
1.Slide crisper straight out to the stop, lift front, then slide the rest of the way out.
2.Replace in reverse order.
To remove the cover:
1.Push up glass insert from bottom, then slide out with both hands.
2.Lift front of cover frame.
3.Ml out cover frame by pulling up and out.
To replace the cover:
1.Fit back of corner into notch supports on walls of refrigerator, then lower into place.
2.Slide back of glass insert into place, then lower front.
6
