Adjusting the oven temperature control
Oven temperature controls will gradually shift after years of use. So, even though your new oven is properly adjusted to provide accurate temperatures, it may cook faster or slower than your old oven.
if, after using the oven for a perii of time, you are not satisfied with the temperature settings, you can adjust them by following these steps:
1.Make sure the Oven Temperature Control Knob is turned to the off position. Pull knob straight off and flip it over.
2. | Loosen the locking | screws | inside | the | Notches | Tooth |
| control knob. Note the position of the |
|
| |||
| notches. |
|
|
|
|
|
3. | To lower the temperature, | hold | knob |
|
| |
| handle firmly and move the tooth a notch |
|
| |||
| counterclockwise. | Each notch equals |
|
| ||
| about 10°F (5°C). |
|
|
|
|
|
4. | To raise the temperature, | hold | knob |
|
| |
| handle firmly and move the | tooth | a notch | Locking | screws |
clockwise. Each notch equals about 10°F (5°C).
5. Tighten the locking screws and replace the control knob.
13