Sealed Surface Burners and Cooktop | Whirlpool FGS337G specs

CARING FOR YOUR RANGE

SEALED SURFACE BURNERS AND COOKTOP

Cleaning the surface burners

•You should routinely remove and clean the burner cap. Always clean the burner cap after a spill- over. Keeping the burner cap clean prevents improper ignition and an uneven flame.

•For the proper flow of gas and ignition of the burner, do not allow spills, food, cleaning agents, or any other material to enter the gas tube opening.

•Gas must flow freely through the gas tube opening for the burner to light properly. You must keep this area free of any soil and protect it from boilovers or spillovers. Always keep the burner cap in place whenever a surface burner is in use.

•Let the cooktop cool before cleaning.

•Do not use oven cleaners, bleach, or rust removers.

•Do not obstruct the flow of combustion and ventilation air.

•Be careful not to allow moisture to collect in the control areas. Moisture can cause the ignitor switches to fail.

•Occasionally check the burner flames for proper size and shape as shown. A good flame

is blue in color. If the

5 "	flames are uneven,
8

you may need to clean the burners.

Porcelain burner cap

Burner base

Contoured well area

Ignitor

Gas tube opening

23

Image 23

Whirlpool FGS337G warranty Sealed Surface Burners and Cooktop, Flames are uneven

Contents

8053431 Gas Range Please record your modelÕs information Thank you for buying a Roper appliance Look for the anti-tip bracket securely attached to floor Range SafetyMaking sure the anti-tip bracket is installed Slide range forward For self-cleaning ranges Important Safety Instructions Right front Right rear Control knob Control Panel Using the control knobs Using Your RangeUsing the Surface Burners Burner heat settings To protect your range Home canning informationBig difference When YOU have Place Using the OvenRack placement for specific foods Where to place pans Bakeware Choices Using Aluminum Foil Decrease Setting the ClockClock pad Oven timer pad Electronic display Increase pad Display/clock Time of day Using the Electronic TimerTo cancel the timer Display counts in seconds Roasting meats and poultry Saving energy This Number Factory settingTime of day or minute timer countdown Adjust by Rear BroilingBroiling guidelines Front PAN Minutes Meat Side Position Oven VentApproximate Time ANTI-TIP Bracket Lower slide rail inside drawer Opening Upper drawer guides Storage DrawerRemoving the storage drawer Replacing the storage drawer Tips Before you start the Self-Cleaning cycle, make sure youBefore YOU Start Using Your Range Setting the Controls Time In Hours HOW the Cycle Works Caring for Your Range Cleaning ChartPart Cleaning Method Special Instructions Broiler pan and grid Surface burnersOven cavity Oven racks Flames are uneven Sealed Surface Burners and Cooktop Door removal Door stop clip Pin hole Range Hinge To clean the burnersRemoving the Oven Door Before removing the door Door is removed from the range To removeTo replace OVEN/BROILER Burner TroubleshootingProblem Cause Range does not Work Surface Burners When SELF-CLEANING Your Oven Cooking Results Indicator Lights FlashProblemsolution Our consultants provide assistance with Requesting Assistance or ServicePage Index Cleaning 8053431 Length of Warranty WE will PAY for Full ONE-YEARWarranty WE will not PAY for