CARING FOR YOUR RANGE
REMOVING THE OVEN DOOR (CONT.)
To remove:
1.Open the oven door. Insert door removal pins, included with your range, into both hinge hangers. Do not remove the pins while
the door is removed from the range.
3.Grasp the door on the sides with your fingers on 
the front of the door and
your thumbs on the inside surface.
2.Carefully close the door until it rests against the door removal pins.
4.Pull door straight up, then toward you. Hinge hangers will slide out of front frame hinge slot.
To replace:
NOTE: The door removal pins you inserted must still be in both door hinges.
1.Grasp the door on the sides with your fingers on the front of the door and your thumbs on the inside surface.
2.Hold oven door so that the top edge of each hinge hanger is horizontal. Insert hinge hangers into the front frame hinge slots.
3.Rotate top of door toward range. Slide hinge hangers down onto front frame support pins.
NOTE: Make sure the hinge hangers are fully seated and engaged on the support pins.
4.Insert the door stop clip with the angular surface at the top of the frame hinge slot, then push in the bottom of the clip until flanges are flush with the front frame.
5.Open the door completely and remove the door removal pins. Save door removal pins for future use.
6.Close the door.
Door stop clip
Door removal pin hole
Door removal pin hole 
Range
Hinge 
hanger
Support pins
Front frame hinge slot
Angular
surface of door stop clip
25
