Party chiller
(select models)
The party chiller keeps beverages and other items cooler
than the rest of the fresh food section. A cold air inlet allows air
from the freezer section to pass into the beverage chiller.
The party chiller control is located on the left wall of the fresh food compartment. The control adjusts the amount of cold air allowed in to the beverage chiller. For a cooler temperature in
the party chiller slide the control down.
To Remove:
•First remove the pick off shelf to the left of the party chiller.
•Firmly hold each side of beveragechiller, lift up and awayfrom door liner.
To Install:
• Reverse above procedure.
Crisper Drawers
The Crisper Drawers provide a higher humidity environment for fresh fruit and vegetable storage.
Controls
The Crisper Controls regulate the amount of humidity in the crisper drawer. Slide the control toward the FRUIT setting for produce with outer skins. Slide the control toward the
VEGETABLES setting for leafy produce.
VEGETABLESFRUIT
HUMIDITY CONTROLLED
To Remove:
•Pull drawer out to full extension. Tilt u p front of drawer and pull straight out.
To Install:
•Insert drawer into frame rails and push back intoplace. Note
For best results, keep the crisper drawers tightly closed.
Temperature-Controlled Drawer
The Temperature controlled drawer is a
There isa temperature control which adjusts the amount of cold air allowed into the drawer. The control is located on the right side of the drawer, under the lid.
Set the control to the higher setting _ to provide a normal refrigerator temperature. Set the drawer on the lower setting
when a temperature colder than the main refrigerator compartment is desired. Use the coldest setting when storing meats.
¸¸%¸¸'i
Chiller
Control
Co!d
