REFRIGERATOR CARE
Cleaning
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
Clean the refrigerator about once a month to prevent odors from building up. Wipe up spills immediately.
To clean your refrigerator:
1.Unplug refrigerator or disconnect power.
2.Remove all removable parts from inside, such as shelves, etc.
3.Hand wash, rinse, and dry removable parts and interior surfaces thoroughly. Use a clean sponge or soft cloth and a mild detergent in warm water.
■Do not use abrasive or harsh cleaners such as window sprays, scouring cleansers, flammable fluids, cleaning waxes, concentrated detergents, bleaches or cleansers containing petroleum products on plastic parts, interior and door liners or gaskets. Do not use paper towels, scouring pads, or other harsh cleaning tools. These can scratch or damage materials.
■To help remove odors, you can wash interior walls with a mixture of warm water and baking soda (2 tbs. to 1 qt. [26 g to 0.95 L] of water).
4.Replace the removable parts.
5.Clean the condenser coils regularly. They are located at the back of the cabinet. Coils may need to be cleaned as often as every other month. This may help save energy.
■Use a vacuum with an extended attachment to clean the condenser coils when they are dusty or dirty.
6.Plug in refrigerator or reconnect power.
Change the Light Bulb
The light bulb is located behind the refrigerator control on the upper
NOTE: Only a factory specified replacement light bulb will fit your refrigerator. To get a factory specified replacement light bulb, call the Gladiator™ GarageWorks Customer Interaction Center toll free:
1.Unplug refrigerator or disconnect power.
2.Remove the used light bulb and replace it with a factory specified light bulb.
Vacation and Moving Care
Vacations
If you choose to leave the refrigerator on while you’re away, use up any perishables and freeze other items.
If you choose to turn the refrigerator off before you leave, follow these steps.
1.Remove all food from the refrigerator.
2.Turn the refrigerator control to the off position. See “Using the Control.”
3.Unplug the refrigerator.
4.Clean the refrigerator. See “Cleaning.”
5.Tape a rubber or wood block to the top of the door to prop it open far enough for air to get in. This stops odor and mold from building up.
Moving
When you are moving your refrigerator to a new home, follow these steps to prepare it for the move.
1.Remove all food from the refrigerator.
2.Turn the refrigerator control to the off position. See “Using the Control.”
3.Unplug the refrigerator.
4.Clean, wipe, and dry it thoroughly.
5.Take out all removable parts, wrap them well, and tape them together so they don’t shift and rattle during the move.
6.Tape the doors shut and tape the power cord to the refrigerator cabinet.
When you get to your new home, put everything back and refer to the “Installation Instructions” section for preparation instructions.
TROUBLESHOOTING
Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.
Your refrigerator will not operate
■Is the power supply cord unplugged? Plug into a grounded 3 prong outlet.
■Has a household fuse blown or circuit breaker tripped? Replace the fuse or reset the circuit.
■Is the Refrigerator Control turned to the OFF position? See “Using the Control.”
The lights do not work
■Is the power supply cord unplugged? Plug into a grounded 3 prong outlet.
■Is a light bulb loose in the socket? Turn the refrigerator control to the off position. Disconnect the refrigerator from the electrical supply. Gently remove the bulb and reinsert. Then reconnect the refrigerator to the electrical supply and reset the refrigerator control.
■Has a light bulb burned out? Replace with an appliance bulb of the same wattage, size, and shape. See “Changing the Light Bulb.”
3.Plug in refrigerator or reconnect power.
There is water in the defrost drain pan
■Is the refrigerator defrosting? The water will evaporate. It is normal for water to drip into the defrost pan.
■Is it more humid than normal? Expect that the water in the defrost pan will take longer to evaporate. This is normal when it is hot or humid.
8
