INSTALLATION
PRIOR TO CONNECTING
Check that the voltage on the rating plate corresponds to the voltage in your home.
Place the oven on a stable, even surface that is strong
enough to hold the oven and the food utensils you put in it. The right
side of the unit is the
heavy side. Use care when handling. Position the oven at a distance from other heating sources. The cooling air, which is taken in by the oven, must not exceed 35°C temperature. For sufficient ventilation there must be a space of at least
This oven is not intended to be placed or used on a working surface lower than 850 mm above the floor.
For best visibility of the display, place the oven such that the display is below or equal in height to your eyes when standing in front of it.
Do not remove the microwave inlet protection plates located on the side of the oven cavity wall. They prevent grease & food particles from entering the microwave inlet channels.
Ensure that the appliance is not damaged. Check that the oven door closes firmly against the door support and that the internal door seal is not damaged. Empty the oven and clean the interior with a soft, damp cloth.
Do not operate this appliance if it has a damaged mains cord or plug, if it is not working properly, or if it has been damaged or dropped. Do not immerse the mains cord or plug in water. Keep the cord away from hot surfaces. Electrical shock, fire or other hazards may result.
AFTER CONNECTING
When the appliance is first plugged in or after a power failure, the display is blank. If required, the oven can display a
The oven can be operated only if the oven door is firmly closed.
Poor television reception and radio interference may result if the oven is located close
to a TV, radio or aerial.
The earthing of this appliance is compulsory. The manufacturer will accept no responsibility for injury to persons, animals or damage to objects arising from the
The manufacturers are not liable for any problems caused by the user’s failure to observe these instructions.
2