Whirlpool JT 359 manual Start Protection / Child Lock, Pause Or Stop Cooking, Clock, 13524

Models: JT 359

1 24
Download 24 pages 52.15 Kb
Page 6
Image 6
START PROTECTION / CHILD LOCK

START PROTECTION / CHILD LOCK

This automatic safety function is activated one minute after the oven has returned to “stand by mode“. (The oven is in “stand by“ when the 24-hour Clock is displayed, or if the Clock has not been set, when the display is blank).

The door must be opened and closed e.g. putting food into it, before the safety lock is released. Else the display will show “door“.

PAUSE OR STOP COOKING

To pause cooking:

The cooking can be paused to check, turn or stir the food by opening the door. The setting will be maintained for 10 minutes.

To continue cooking:PAUSE OR STOP COOKINGCLOCK13524 Close the door and press the Start Manual backgroundManual background button ONCE. The cooking is Manual backgroundManual background resumed from where it was paused. Pressing the Start button TWICE will increase the time by 30 seconds.

If you don’t want to continue cooking:

Remove the food, close the door and press the STOP button

A beep will signal once a minute Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background for 10 minutes when the cooking is finished. Press the STOP button or open the door to cancel the signal.

Note: The oven will only hold the settings for 60 seconds if the door is opened and then closed after the cooking is finished.

CLOCK

13524

1.Press the Clock button (3 seconds) until the left-hand digit (hour’s) flicker.

2.Press the +/- buttons to set the hours.

3.Press the Clock button again. (The two right hand digits (minutes) flicker).

4.Press the +/- buttons to set the minutes.

5.Press the Clock button again.

The Clock is set and in operation.

Clock timeout: each step must be accomplished within 60 seconds. Else, the display will return to stand by mode automatically.

Note: When the appliance is first plugged in or after a power failure, the display is blank. If the clock is not set, the display will remain blank until the cooking time is set.

If you wish to remove the clock from the display once it has been set. Simply press the Clock button (3 seconds) until the left- hand digit (hour’s) flicker. Then press the Stop button.

To reinstate the clock, follow the above procedure.

6

Page 6
Image 6
Whirlpool JT 359 manual Start Protection / Child Lock, Pause Or Stop Cooking, Clock, 13524