UsingYourMicrowaveOven
Microwave oven controls
There are three parts in the control section: - Display/Clock and Indicators
Instructions for each control are covered on the following pages. Read them carefully.
When you first plug in the oven, the Display will flash ‘88:88”. Touch STOPCLEAR and ‘1:OO” will appear. If, after you set the Clock (page 1l), the Display again shows all 8’s, it means your elect&y was off for a while. Reset the Clock.
Display/clock and lndlcators
When you are not using the microwave oven, this is an accurate clock.
When you are using the microwave oven, it displays time settings, cook powers, and Indicators.
Command pads
l Touch Command Pads to tell the microwave oven what to do and in what order. A few examples:
ChXk
l
l
Each Command Pad (except START, STOP/ CLEAR, AUTO START/CLOCK and TIMER/ PAUSE) causes an Indicator to light when you touch the Command Pad. While the oven is running, an Indicator (or Indicators) will be on to show what the oven is doing.
lf you touch two instructions into the same cyde, the second set of instructions will cancel the first.
Number pads
Once you’ve touched a Command Pad to tell the oven what you want it to do, you’ll touch Number Pads to tell if ...
-a time,
-a Cook Power.
Display messages
Messages will appear on the display to guide you with your cooking. lf you attempt to enter unacceptable instructions, ‘ERROR’ will appear in the Display. Touch STOP/CLEAR and
10