..

.a. m

4. Touch COOK POWER.

The COOK POWER Indicator Light will come on and the Display will show “P-HI:’This shows the oven is pre-

programmed to cook at full (HIGH) power.

The Display will show what you touched. This example shows you touched Number Pad 5 for 50% of full power.

5.Touch a Number Pad for the Cook Power you want.

 

The COOK 1 and COOK POWER

 

Indicator Lights will stay on to show

 

that the oven is cooking in the first

6. Touch START.

cycle at a Cook Power other than

high.

The Display counts down the time to show how much cooking time is left in the first cycle.

For 2 of every 10 seconds, the Display will show the Cook Power you selected.

When the cooking time ends, “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CAN- CEL.) “End” will remain on the Display and a beep will sound every 30 seconds (to remind you that food is left in the oven] until door is opened or CANCEL is touched. The Display will then show the time of day.

Changing cook power

The Cook Power can be changed any time before touching STARTor during the cycle

. Touch COOK POWER.

l Touch a number for the new Cook Power.

l Touch START.The cycle will cook at the new Cook Power for the original time.

l

l

OR...

Touch COOK POWER twice if you want to change a lower Cook Power to HIGH. Touch START.

10

Page 10
Image 10
Whirlpool MW87OOXS manual Changing cook power, Touch Cook Power, Touch a Number Pad for the Cook Power you want