Additional information:
l Temperature may be changed after STARTis touched by touching TEMP the new number and START.
l Auto Set TEMP will follow the last COOK cycle if programmed.
l “PROB”will show on the Display after STARTis touched if the probe is not plugged
into the oven. This will only appear when Auto Set TEMP has been selected alone, or between the last COOK cycle and Auto Set TEMP selection.
l “ERR”will show on the Display after STARTis touched, if an incorrect temperature has been selected (under 90°F or over 200°F).
l See “Hintsfor using the temperature probe” on pages 21 and 20.
Defrosting
Use QUICK DEFROST to thaw | frozen food before cooking. For suggested defrost times, see |
the guide behind the oven door or in your MICRO MENUS” cookbook. | |
DO THIS... | THIS HAPPENS... |
1. Put frozen food in the oven and close the door.
The QUICK DEFROST Indicator Light will come on and the Display will show four 0’s.
2. Touch QUICK DEFROST.
3.Touch Number Pads for the defrosting time you want.
4. Touch START.
The Display will show the number you touched in the order you touched them. This example shows 2 minutes, 45 seconds.
The QUICK DEFROST Indicator Light will stay on to show that the oven is in the Quick Defrost Cycle.
The Display counts down the time to show how much defrosting time is left
When the defrost time ends, “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CANCEL.) “End” will remain on the Display and a beep will sound every 30 seconds [to remind you that food is
in the oven] until door is opened or CANCEL is touched. The Display will then show the time of day.
