count
dOWll
The display counts down the time to show how much time is left In the first cycle.
When the cooking time ends, “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CAN- CEL.) “End” will remain on the Display and a beep will sound every 30 second [to remind you that food is left in the oven] until door is opened or CANCEL is touched. The Display will then show the time of day.
Changing the cooking time
Cooking time can be changed any time before touching STARTor during the cycle:
1.Touch COOK 1.
2.Touch numbers for the new time.
3.Touch START.
Cook 1will continue cooking for the new time.
Cooking at lower cook powers
For best results, some recipes call for lower Cook Powers. The lower the Cook Power, the slower the cooking. Each Number Pad also stands for a different percentage of Cook Power, Many recipes in your MICRO MENUS” Cookbook tell you, by number, which Cook Power to use. Recipes in other books and magazines may tell you by name (HI, MED, LO, etc.) or
percentage (IO%, 50%, BO%, etc.).
The following chart gives the percentage Cook Power name usually used.
automatic |
| 100% of full | power | HIGH | |
9 | = 90% of full power |
| |||
B = | 80% | of full | power |
| |
7 | = | 70% | of full power | ||
6 | = | 60% | of full | power |
|
5 | = | 50% | of full | power | MED |
of Cook Power each Number Pad stands for, and
4 = 40% of full power
3 = 30% of full power
2 = 20% of full power
1 7 10% of full power LOW
0 7 no power [fan and light will be off)
DO THIS...
1. Put food in me oven and close the door.
THIS HAPPENS...
The COOK 1 Indicator Light will come on and the Display will show four O’s
2. Touch COOK 1.
The Display will show the numbers you touched in the order you touched them. This example shows 7 minutes, 30 seconds.
3.Touch Number Pads for the cooking time you want.
continued on next page | 9 |
|
