Whirlpool MW87OOXS manual Hints for using the temperature probe, Don’T

Models: MW87OOXS

1 36
Download 36 pages 32.17 Kb
Page 20
Image 20

 

The PROBE TEMP and COOK POWER

 

Indicator Lights will stay on.

 

8. Touch START.

The Display will show “CCCL” to

show the food is less than 90°F.

 

 

 

 

As the food cooks, the Display will

 

show the internal temperature

of

 

the food for every 5°F increase.

 

 

For 2 of every10 seconds, the Dis-

 

play will show the Cook Power you

 

selected, if you are using a Cook

 

Power other than high.

 

 

When the probe senses the tem-

 

perature you selected, the oven

 

shuts off. “End” will show on the

 

 

Display and 4 beeps will sound.

 

(You can stop the beeping by

 

 

opening the door or by touching

 

CANCEL.) “End” will remain on

the

Display and a beep will sound every 30 seconds (to remind you that food is left in the oven] until door

is opened or CANCEL is touched. The Display will then show the time of day.

NOTE: “Err”will be displayed after START is touched, if an incorrect temperature has been selected (under 90°F or over 200°F).

Hints for using the temperature probe

DO...

l use hot pads when removing probe from food or food from oven.

l stir foods during cooking when recommended.

*stir soups, casseroles and drinks before serving.

*cover roasts with foil and let stand a few minutes after cooking. Remove foil if you de- tide to cook it longer.

l remove the probe from the oven when not cooking by temperature.

DON’T...

l let probe or probe cable touch any part of the oven interior.

l let probe touch foil (if used). Foil can be kept away from probe with wooden tooth- picks. Remove foil if arcing occurs.

l use paper, plastic wrap or plastic con- tainers. They will be in the oven too long.

* use probe in regular oven.

l force probe into frozen food.

l use probe for foods that need to simmer.

NOTE: Some foods are started using a timed (COOK) cycle and finished by using a temperature (PROBE TEMP) cycle. You can set PROBETEMPto follow COOK, to avoid the need to reset the oven halfway through cooking. PROBETEMPcan be programmed with the temperature probe out. The oven will then pause between COOK and PROBETEMP.“PROB” will show on the Display to remind you to plug in the probe. Touch STARTto continue cooking.

20

Page 20
Image 20
Whirlpool MW87OOXS manual Hints for using the temperature probe, Don’T