When SLOW COOK/SIMMER ends, “End” will show on the Display and 4 beeps will sound. (You can stop the beeping
by opening the door or by touching CANCEL.) “End” will remain on the Dis- play and a reminder tone will sound every 60 seconds until the door is opened or CANCEL is touched. The Dis- play will then show the time of day.
NOTE: If food is removed from oven during KEEP WARM, touch KEEP WARM then CANCEL to cancel remainder of the time.
AUTO SENSOR operating hints
l l l l l
l
l
l
l
ALL AUTO SENSOR cooking categories have preset Cook Powers.
The COOK POWER Indicator Light does not come on during AUTO SENSOR Cycles. No Cook or Temperature cycles can be used with AUTO SENSOR Cycles,
Auto Start may be used with AUTO SENSOR Cycles.
Quick Defrost and Keep Warm may be selected with Cook/Reheat or Cook Frozen
only. Keep Warm is automatic at the end of Slow/Cook/Simmer cycle.
Pause may be used with Cook/Reheat or Cook Frozen only. It will stop the oven between the first and second part of the cycle. See “Using PAUSE:’ page 20.
In Cook/Reheat and Cook Frozen
The AUTO SENSOR Indicator Light goes off at the end of the first part of the Slow Cook/Simmer cycle.
“Err”will show on the Display if the door is opened during the first part of any AUTO SENSOR cycle. “Err”will also show on the Display if AUTO SENSOR malfunctions. Open the door and touch CANCEL to clear the Display. Do not reset AUTO SENSOR. The food may over or undercook. To finish cooking food, estimate the remaining cooking time. Reset
the oven using the COOK cycle and approximate Cook Power setting.
Cooking at High Cook Power
DO THIS... | THIS HAPPENS... |
1Put food in the oven and close the door.
2.Touch COOK.
3.Touch Number Pads for the cooking time you want.
The COOK Indicator Light will come on and the Display will show four 0’s.
The Display will show the numbers you touched in the order you touched them. The example shows 1 minute, 30 seconds.
12
