6.Turn over or rearrange food being defrosted. Close door.

NOTE: Oven will remain off until you touch START.

7.Touch START.

The QUICK DEFROST Indicator stays on and the Display counts down the remaining time.

and a reminder tone will sound eve&

60 seconds until the door is opened or CANCEL is touched. The Display will then show the time of day.

Using PAUSE with AUTO SENSOR

Pause may be used in AUTO SENSOR with the Cook/Reheat or Cook Frozen cycles only.

1.Put food in the oven and close the door.

2.Touch COOK/REHEAT or COOK FROZEN.

3.Touch a Number Pad for the cooking category you want.

4.Touch PAUSE.

5.Touch START.

When the first part of the AUTO SENSOR cycle is done, you will hear 2 beeps and the oven will shut off.

6.Open the door, Stir or turn the food or add ingredients. Close the door.

7.Touch STARTto continue.

NOTE: The oven will remain off until you touch START.

Adding PAUSE to Cycle in Operation

Pause can be added to QUICK DEFROST or AUTO SENSOR after STARThas been touched.

1.Touch PAUSE.

2.Touch START.

The oven will

automatically

stop

halfway

through

QUICK DEFROST to allow you

to turn

over or rearrange

the

food

being

defrosted.

It will

stop after

the first (AS) part of the AUTO

SENSOR cycle

to

allow

you

to stir, rotate

or

rearrange food

or to add ingredients.

NOTE:

The oven will remain off until you touch START.

 

 

 

Pause is Automatic between COOK and PROBE TEMP

Your microwave oven will automatically pause between COOK and PROBE TEMF?“PROB” will show on the Display to remind you to plug in the probe. Touch STARTto continue cooking.

22

Page 22
Image 22
Whirlpool MW8900XS, MW8901XS manual Using Pause with Auto Sensor, Adding Pause to Cycle in Operation