Adjusting the oven temperature
Oven temperature controls will gradually shift after years of use. So, even though your new oven is properly adjusted to provide accurate temperatures, it may cook faster or slower than your old oven.
If, after using the oven for a period of time, you are not satisfied with the temperature settings, you can change them by following these steps:
1. Make sure the Oven Temperature Control Knob is turned to the off position. Pull knob straight off and flip it over.
| P |
2. Loosen the locking screws inside the control | Locking |
knob. Note the position of the notches. |
|
3.To lower the temperature, hold knob handle firmly and move the tooth a notch counter- clockwise. Each notch equals about 5°F (25°C).
4.To raise the temperature, hold knob handle firmly and move the tooth a notch clockwise. Each notch equals about 5°F (2.5%).
5.Tighten the locking screws and replace the control knob.
control
$ e
4 II
Tooth
Notches
10
