Using Your Cooktop
Contmued
Terminal
Receptacle,
/ A+,,/
Usingthe vent system
Using the cooktop’s
The fan will automatically operate at HIGH speed when the grill module is in use. The fan cannot be manually turned off when the grill module is operating.
When using surface units, turn the Vent Fan Control Knob clockwise to HIGH or LOW. Use HIGH only when doing cooking that produces significant cooking vapors, odor and smoke. You will hear a click when the fan comes on. Turn counterclockwise to turn the fan OFF.
The fan filters must be in place for the fan to operate properly.
Personal Injury Hazard
Do not put hands in vent box when fan or controls are on. The vent fan system turns on automatically when the grill is used.
Turn fan and cooktop controls to OFF. Failure to do so could result in personal injury.
Changingthe cooktop modules
The cooktop modules will work on both sides of the cooktop. (See page 17 for grill removal instructions and page 11 for optional griddle installation instructions.)
Burn and Electrical Shock Hazard
Be sure all controls are off and the mod- ules are cool before handling modules. Failure to do so could result in burns or electrical shock.
To remove coil element, solid element and ceramic glass modules:
1.Lift module slightly by the handle.
2.Pull module toward you with both hands to unplug it.
3.Lift module out of cooktop.
To replace modules:
1.Line up module terminal with cooktop recep- tacle.
2.Push terminal into receptacle until it is plugged in.
3.Use the handle to lower the front of the module.
10
