Sanyo Katana Dialing From the Contacts List, Using Speed Dialing, Press Contacts Find/Add Entry

Dialing From the Contacts List

To dial directly from a Contacts entry:

1.Press > Contacts > Find/Add Entry.

Shortcut	From standby mode, press Contacts (right softkey)
	to list entries.

2.Highlight the entry you want to call and press or

to dial the entry’s default phone number.

–or –

To dial another number from the entry, highlight the name and press , highlight the number you wish to

call, and press or .

Tip:	You can also place a call by pressing Options (right softkey) >
	Call or Call:Speaker On.
Note:	The icons next to each entry represent the Contacts labels
	(for example, Mobile, Home, Work, etc.). A triangle next to
	an icon means there is another label for the entry. Press the
	navigation key right or left from the Contacts list to select
	the desired label.

Phone Basics

Using Speed Dialing

With this feature, you can dial your favorite entries using one keypress for locations 2–9. (See “Assigning Speed Dial Numbers” on page 100.)

To use speed dial for voice calls:

▶From standby mode, press and hold the appropriate key for approximately two seconds.

–or –

▶From standby mode, press the appropriate key and

press or .

Section 1A: Phone Basics 32