Whirlpool RF354BXD warranty The anti-tipbracket, Optional door panel pat

The anti-tip bracket

The range will not tip during normal use. However, tipping can occur if you apply too much force or weight to the open door without the anti-tip bracket properly secured.

Tip Over Hazard

Connect anti-tip bracket to the range feet.

Reconnect anti-tip bracket, if the range is moved.

Do not push down on the open oven door.

Follow the installation instructions.

Do not let children climb onto the oven door.

Failure to do so can result in death, burns, or other injury.

To	verify	the	anti-tip	bracket	To	verify	the	anti-tip	bracket
is engaged		(if	you	have a floor	is	engaged	(if	you	have a wall
brat	ket):				bracket):

l Remove the lower panel. (See page 20.)

Cable

l

l

l

Rear leveling

leg

Floor bracket

Look to see if the anti-tip bracket is attached to floor with screws.

Make sure one rear leveling leg is posi- tioned under the anti-tip bracket.

See Installation Instructions for further details.

(attached to rear of control panel)

Wall bracket

l Look to see if the anti-tip bracket is attached with screws to the wall behind the control panel.

l Make sure the cable on the back of the range is secured by the two hooks on the bracket.

l Cable must be unhooked from wall bracket to move range for cleaning or service. Reconnect cable before using range.

l See Installation Instructions for further details.

Optional door panel pat

If you would like to change the color of your oven door glass to white or almond, you can order one of these kits from your Whirlpool Dealer. The kits include easy installation instructions.

l

l

Whlte (Kit No. 814324) Almond (Kit No. 814325)

21