Surface Units and Reflector Bowls
Removing
Burn and Electrlcal Shock Hazard
Make sure all surface units are OFF before removlng surface units and reflector bowls. Failure to do so can result in burns or elec- trlcal shock.
I | I | I | I |
1. Turn off all surface units. |
| 2. | Lift the edge of the unit, OppOSite |
|
|
| the receptacle, just enough to |
|
|
| clear the element hold down clip |
|
|
| and the reflector bowl. |
3.Pull the surface unit straight away from the receptacle.
4.Lift out the reflector bowl. See “Cleaning Chart” on page 26 for cleaning instructions.
20