Whirlpool RF385PXP If you need service or assistance, we suggest you follow these four steps

The Oven Light

The oven light will come on when you open the oven door. Toturn the light on when the oven door is closed, push the Oven light switch on the console. Push ii again to turn off the light.

	2. Remove the light bulb from its
	socket. Replace the bulb with a
	40-watt appliance bulb.
	Replace the bulb cover and snap
Remove the bulb cover in the back	the wire holder in place.
	Turn the power back on at the
of the oven by pulling out and push-	main power supply.
ing the wire holder to the side.

I CAUTION: The bulb cover must be in place when using the oven. The cover protects the bulb from breaking.

NOTE: The Oven light will not work during the self-cleaning cycle.

If you need service or assistance,

we suggest you follow these four steps:

1. Before caIKng for assistance...

Performance problems often result from little things you can fix yourself without tools of any kind.

If nothlng operates:

l Is the power supply cord plugged into a live circuit with the proper volt- age? (See “Installation Instructionsl’)

l Have you checked the main fuse or circuit breaker box?

If the oven will not operate:

lIs the Oven Selector turned to a set- ting (BAKE or BROIL. but not TIMED

BAKE]?

l Is the Oven Temperature Control turned to a temperature setting?

If surface untts will not operate:

l Have you checked the main fuse or clrcult breaker box?

l Are surface units plugged in all the way?

l Do the control knobs turn?

If surface unlt control knob(s) will not turn:

lDid you push in before trying to turn?

If the Self-Cleanlng cycle will not operate:

l Are the Oven Selector and Oven Temperature Control set on CLEAN? l Does the Start Time Dial show the

correct time of day?

lIsthe Stop Time Dial set ahead to the time you want the cleaning cycle to

stop?

lIs the Lock Lever all the way to the right?(The Clean Light will come on.]

22