RIGHT REAR ’ | RIGHT FRbNl |
CONTROL KNOB | CONTROL KNOB |
Using the surface units
Surface Unit Indicators
The solid dot in the surface unit indicator shows which surface unit is turned on by that knob.
\
Control knobs must be pushed in before turning them to a setting. They can be set anywhere between HI and OFF.
Signal light
One of the signal lights will glow when a surface unit is on.
Until you get used to the settings, use the following as a guide. For best results, start cooking at the high settings; then turn the control knob down to continue cooking.
Use HI to start foods cook- ing; to bring liquids to a boil.
Use
or pancakes.
Use MED |
| Use | ||
for gravy, |
| to keep | food | |
puddings |
| cooking | after | |
and | icing; | to | starting | it |
cook | large | on a higher | ||
amounts | of | setting. |
| |
vegetables. |
|
|
|
Use LO to keep food warm until ready to serve. Set the heat higher or lower within the LO
CAUTION: The use ot the HI setttng tar long periods of tlme can damage surtace untts and discolor chrome trim rings. Start cooklng on HI and turn control down to continue cooklng.
band to keep food at the temperature you want,