c30 m0
Replace with a
APPLIANCE bulb.
Pull knob and trim ring straight out. Remember how the spring goes.
Using the oven light
To turn on the oven light. push the oven light switch. Push it agaln to turn off the oven light.
To replace the oven light bulb:
Turn the electric power off at the main power supply. Remove the light bulb from the socket.
Replace the bulb with a 40.watt appliance bulb (designed to stand up to oven heat) available at most grocery, variety and hardware stores.
The oven vent
There is an oven vent under the right rear surface element. When the oven is on. heated air will escape through it A vent is needed for air circulation In the oven during baking. You can cook on this surface unit while the oven is on. A warm pan of food will stay warm on this unit while the oven is on. It may be warm enough to melt butter, too.
Do not try to save heat or energy by blocking the vent. Poor baking can result. Plastic utensils may melt if they are over the vent while the oven is on.
The outional rotisserie
If you would like a rotisserie with your oven. you can order a kit from your dealer. Easy installation instructions come with the kit.
Cleaning and caring for your range
Your range is deslgned to be easy to clean. You will usually wipe off spills and spatters when they happen. but you will sometimes want to clean under and behind the control knobs and surface units. This section will tell you how to remove those. and what to use when cleaning.
Removing and replacing surface unit control knobs:
1.Be sure the control knobs are set to “OFF.”
2.Pull straight out on the black knobs.
3.If the control has a chrome trim ring. pull it straight out.
4.Wash the knobs (and trim rings) in warm. sudsy water.
5.Replace the trim rings first. If the control spring was removed, put it back exactly as shown on the left.. .small end first.
6.Hold the black knob so it points to “OFF.” Push it straight back on.
7
