Whirlpool RM978BXS Adding PAUSEto the cycle in operation, PAUSEbetween COOK cycle and PROBETEMP

Models: RM978BXS RM973BXS

1 44
Download 44 pages 37.19 Kb
Page 31
Image 31
Adding PAUSEto the cycle in operation

Turn over or rearrange food being defrosted. Close door.

NOTE: Oven will remain off until you touch START.

m

7.Touch START.

The QUICK DEFROSTIndi- cator stays on and the Display counts down the remaining time.

When the defrost time ends, “End”will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CANCEL.) “End”will remain on the Display and a beep will sound every 30 sec- onds (to remind you that food is in the oven) until door is opened or CANCEL is touched. The Display will then show the time of day.

Adding PAUSEto the cycle in operation

Pause can be added to any cycle in operation as long as there is another cycle programmed to follow. It can also be added to QUICK DEFROSTor AUTO SENSORafter STARThas been touched.

1.Touch PAUSE.

2.Touch START.

The oven will automatically stop after the cycle in operation to allow you to stir, turn, or rotate food or add additional ingredients. It will stop halfway through QUICK DEFROSTto allow you to turn over or rearrange the food being defrosted. It will stop after the first (AS) part of the AUTO SENSORcycle to allow you to stir, rotate or rearrange food or to add ingredients. NOTE: The oven will remain off until you touch START.

PAUSEbetween (COOK) cycle and PROBETEMP

PAUSEis automatic between COOK 1or COOK 2 and PROBETEMP“PROB” will show on the Display to remind you to plug in the probe. Touch STARTto continue cooking.

Using PAUSEwith AUTO SENSOR

PAUSEmay be used in AUTO SENSORwith the Cook/Reheat or Cook Frozen cycles only.

continued on next page.

31

Page 31
Image 31
Whirlpool RM978BXS, RM973BXS manual Adding PAUSEto the cycle in operation, PAUSEbetween COOK cycle and PROBETEMP