When Cook 2 ends, “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CANCEL.) “End” will remain on the Display and a beep will sound every 30 seconds until the door is opened or CANCEL is touched. The Display will then show the time of day.
Hints for Cooking With More Than One Cycle.
You can program the cooking cycles in any order. However, when the
microwave oven is started, it will automatically go through the cycles in
Changing or Adding Instructions
You can change times, Cook Powers, or add cycles any time before touching STARTor during oven operation.
l
l
Touch the Cook cycle you wish to change or add (COOK 1or 2). Touch numbers for new time, if desired.
l Touch COOK POWER, if change is desired.
l Touch number for new Cook Power, or touch COOK POWER again if HIGH is desired.
l Touch in new cycle and time, if desired.
. Touch START.
Using AUTO SET
Auto Set TIME and TEMP are preset cooking cycles which store commonly used cooking times and probe temperature settings.
Auto Set TIME
Auto Set TIME provides ten preset times. One to nine minutes at HIGH Cook
Power can be set by touching TIME and the corresponding Number Pad
The Auto Set Chart included with your microwave oven and the Auto Set Guide on the inner door panel help you use Auto Set TIME to cook various food items without having to look up the cooking times.
A preset time of 2 minutes, 30 seconds at HIGH Cook Power is available by touching just the Auto Set TIME pad. The time may be changed to any time from
continued on next page
