Surface elements and reflector bowls | Whirlpool RM988PXS manual

Surface elements and reflector bowls

1.Make sure all knobs are turned to OFF.

2.Lift the edge of the element, opposite the receptacle, just enough to clear the reflector bOWI and trim ring.

3.Pull the surface element straighi away from the receptacle

4.Lift out the reflector bowl and trim ring

See Cleaning Chart on page 22 for cleaning instructions.

Replacing

1.Make sure all knobs are turned to OFF.

2.Line up opening in the reflector bowl and notch in the trim ring with the surface element receptacle.

continued on Inext page

Image 15

Whirlpool RM988PXS manual Surface elements and reflector bowls, Replacing

Contents

Cooktop Lower Oven Before you use your range Imporiant Safety Instructions Copy your Model and Serial Numbers here Model RM988PXS Parts and features Using your range MED-LO Using the surface units Optional accessory canning kit Using the lower ovenBaking or roasting Adjusting the Oven Temperature Control Using the automatic MEALTIMER* control Broiling LJsing the Minute Timer Custom Broil Oven VentBroil Use & Care Guide storage Storage drawerRemoving the storage druwe !C Replacing the storage drawer Control Panel and Knobs Optional Rotisserie Replacing Surface elements and reflector bowls Lift-Up Cooktop Using the Self-Cleaning cycle Before you startSpecial Cautions Setting the controls Page Special tips How it works SELF-CLEANING Cycle Three Hour Setting Part What to USE Cleaning Chart Cleaning the grease filters Lower FiltersTop filter ‘The cooktop light Circuit Breaker Lower oven light Before calling for assistance Franchisedsewice If you need service‘‘If you have a problem% If you need FSP replacement parts? Whirlpool Microwaw Oven Range Product