OPTIONAL ROTISSERIE Rotlrrerle Parts
The Rotisserie has 4 parts. It IS
used with the Grill Module.
1. Remove the
grills from the
Grill Module.
2. Insert rear sup-
port tabs into
slots at rear
of the Grill
Module.
3. Slide forward to
lock. Tilt top to
level.
4. Insert front sup-
port tabs into
slots at front of
the Grill
Module.
Hanglng Pins
Hlgh Posltlon Low Posltlon
5. Slide back to
lock. Tilt top
to level.
6. Put motor socket and pins through holes
in Rear Support at the high or low position
1. 2. 3. 4. 14
Put one fork on the spit pointing away from 5.
the handle.
Push spit through meat so the weight is
balanced around the center.
Put the second fork on the spit pointing
toward the meat.
Push both forks into the meat and tighten
the thumbscrews.
6.
7. Push the pointed end of the spit all the way
into the motor socket.
Put
the handle end of the spit into the high
or low slot [to match the motor socket posi-
tion) of the Front Support.
Plug in the Rotisserie motor and turn on the
Grill Module. See page 15 for suggested
cooking times.