Cleaning and caring for your range
CONTROL PANEL AND KNOBS
1.Flrst make sure knobs are set on OFF then pull knob stralght otf.
2.Use warm soapy water and a soft cloth to wipe the panel. Rinse and wipe dry
SURFACE UNITS AND
REFLECTOR BOWLS
REMOVING
1.Be sure surface units are OFF and COOL.
2.Lrft the edge of the unit opposite the recep- tacle just enough to clearthe reflector bowl.
3.Pull the surface unit straight away from the receptacle.
3.Wash knobs In warm soapy water Rinse well and
4.Lift out the reflector bowl
REPLACING
1.Be sure surface unit controls are OFF.
4. Push the knobs straight back on. Make sure |
-
/
they point to OFF |
2.Line up opening in the reflector bowl with the surface unit receptacle.
16
