The fan filters must be in place for the fan to operate properly.
Personal Injury Hazard
Do not put hands in vent box when fan or controls are on. The vent fan system turns on automatically when the grill is used.
Turn fan and cooktop controls to OFF. Failure to do so could result in personal injury.
Changingthe cooktop modules
The surface burner modules will work on both sides of the cooktop. (See page 15 for grill removal instructions.)
Burn and Electrical Shock Hazard
Be sure all controls are off and the mod- ules are cool before handling modules.
Failure to do so could result in burns or electrical shock.
To remove surface burner modules:
1.Lift off surface burner grates and caps.
2.Lift slightly by the handle.
3.With both hands, pull module toward you to clear orifices (gas lines). Lift out.
To replace modules:
1.Line up the venturi (burner inlet tubes) with the burner orifices.
2.Push the module until it is seated properly.
3.Lower front with the handle.
4.Install surface grates.
11
