Using your range
OVEN TEMP | SURFACE | OVEN LIGHT |
CONTROL KNOB | BURNER | SWITCH 1 |
| INDICATORS |
|
LEFT FRONT | LEFT REAR | RIGHT FRONT | RIGHT REAR |
CONTROL KNOB | CONTROL KNOB | CONTROL KNOB | CONTROL KNOB |
Using the Surface Burners
These ranges are equipped with either standing pilots or electronic ignitors. Standing pilots must be lit initially with a match following the directions on page 10.The pilot light will remain lit when the burners are turned off. Toturn a burner on again, just push in and turn the control knob to LITEand the burner will Ilght. Electronic ignitors automatically light the burners each time they are used.
Surface Burner Indicators
The solid dot in the surface burner indicator shows which surface burner is turned on by that knob.
Control knobs must be pushed in,
then turned to LITEposition. On elec- tronic ignitor models, the clicking sound is the ignitor sparking.
After the burner lights, turn the Control knob back to a desired setting. The control knob can be set anywhere between HI and OFF Do not cook witf~ the control in the LITE posiffon.
In Case of a Prolonged Power Failure
Surface burners with electronic ignitors can be manually lighted. Hold a lit match near the burner and turn the control to the LITEposition. After the burner lights. turn the control to the desired setting. Power failures will not affect Stand- ing Pilots.
WARNING: Do not aftempt to light the oven burner during a power failure. Personal injury could result.
6
