Whirlpool SF350BEE Setting The Controls, Using The Self-Cleaning Cycle, Push In And Turn, You See

USING THE SELF-CLEANING CYCLE

SETTING THE CONTROLS

1. Set the oven control knob to CLEAN.	PUSH IN AND TURN	YOU SEE
The door will lock itself. If the door has a problem		OVEN ON light
locking, it will try to lock itself every 12 seconds		goes on.
for one minute. If the door fails to lock, the Self-		DOOR LOCKED/
Cleaning cycle will cancel. The Self-Cleaning
		CLEANING light
cycle will last 4 hours, 30 minutes.
		flashes until you
NOTE: There will be a 30-minute cool-down		close door, then
		is solid.
1⁄2 hour before the cycle is over.
		HEATING light goes
		on when oven starts
		heating.

2.During the last 30 minutes of the Self-Cleaning cycle the oven will start to cool down.

Once the oven goes below the locked temperature:

YOU SEE

OVEN ON and DOOR LOCKED/CLEANING lights are on.

HEATING light goes off.

YOU SEE

OVEN ON light flashes.

DOOR LOCKED/ CLEANING light goes out when door unlocks.

3. Turn the oven control knob to OFF. TURN YOU SEE

OVEN ON light goes out.

4.After the oven is cool, wipe off any residue or ash with a damp cloth or sponge. If needed, touch up spots with a mild abrasive cleanser or cleaning sponge.

18