CARING FOR YOUR RANGE
LIFT-UP COOKTOP AND SURFACE BURNERS
1.Remove the surface burner grates.
2.Lift the front of cooktop at both front corners until the support rods lock into place.
NOTE: Do not drop the
cooktop. Damage could result to the porcelain and the cooktop frame.
3.Wipe the surface under the cooktop with warm, soapy water and a sponge. Use a soap- filled plastic scrubbing pad on heavily soiled
areas.
4.Wipe off the surface burners with warm, soapy water and a sponge after each use. To remove
wWARNING
Carbon Monoxide Poisoning Hazard
Do not operate with a yellow flame.
Doing so can result in death, heart attack, or convulsions.
5.Check the burner flames once in a while for pro- per size and shape as
Ports | shown. A good flame is | |
blue in color. If flames | ||
| ||
1 " | lift away from ports, are |
2
yellow, or are noisy, turn off the burner. Allow the burner to cool and follow Step 6. If you still have a problem, contact an authorized Whirlpool service technician to
check the air/gas mixture or see the Installation Instructions.
6.If the ports are clogged, clean with a straight pin. DO NOT enlarge or distort the ports.
DO NOT use a tooth-
pick to clean the ports. Toothpick pieces may clog the ports.
22