Using your range
OVEN TEMP | SURFACE |
CONTOL | BURNER |
| INDICATORS |
LEFT FRONT | LEFT REAR | RIGHT FRONT | RIGHT REAR |
CONTROL KNOB | CONTROL KNOB | CONTROL KNOB | CONTROL KNOB |
Using the Surface Burners
This range is equipped with either standing pilots or electronic ignitors. Stand- ing pilots must be lit initially with a match following the directions on page 9. The pilot light will remain lit when the burners are turned off. To turn a burner on again, just push in and turn the control knob to LITEand the burnerwill light.
Electronic ignitors automatically light the burners each time they are used.
I | 1 |
Control knobs must be pushed in, then turned to LITEposition. On elec- tronic ignitor models, the clicking sound is the ignitor sparking.
After the burner lights, turn the control knob back to a desired setting. The control knob can be set anywhere between HI and OFF. Do not cook with the control in the LITE position.
In Case of a Prolonged Power Failure
Surface burners with electronic ignitors can be manually lighted. Hold a lit match near the burner and turn the control to the LITEposition. After the burner lights, turn the control to the desired setting. Power failures will not affect Stand- ing Pilots.
