Removable cooktop

1.
Remove surface burner grates.
2. Lift front of cooktop enough to clear front of
range. Grasp both sides of cooktop, lift and
pull forward to remove.
Personal Injury and Product
Damage Hazard
l
Be sure the support rod is fully extended
and in the locked position. Failure to do so
could result in personal injury from the
cooktop accidentally falling.
l
Do not drop the cooktop. Damage
can
resuh to the porcelain and the cooktop
frame.
3. Wipe surface under cooktop with warm, soapy
water. Use a soapy steel-wool pad on heavily
soiled areas.
NOTE:
When cleaning under the cooktop on
standing pilot model, be careful not to extin-
guish pilots.
4. Replace cooktop by fitting back of cooktop into
grooves in rear brackets. Lower cooktop.
5. Replace burner grates.

Surface burners

1.
Remove the cooktop, following the instructions
above.
2. Wipe off surface burners with warm, soapy
water and a sponge after each use.
3. If ports are clogged, clean with a straight pin.
DO
NOT enlarge or distort the ports. DO
NOT use a toothpick to clean the ports.
4. Occasionally check the burner flames for
proper size and shape as shown. A good
flame is blue in color. lf flames lift off ports, are
yellow, or are noisy when turned off, you may
need to clean the burners (see above), or call
a qualified technician for adjustment.

l’/;p-

I . .’ 000 00 000 .’ E
Typical surface burner flame
at the highest setting
16