PROBLEM
Burner mekes
rht;ii: noise
POSSIBLE CAUSE
Burner is wet from washing. Let dry.
SOLUTION
Control knob(s)
You are not pushing in before Push control knob(s) in before turning to
will not turn
turning. a setting.
Cooking results
are not what
you expected
The range is not level.
The oven temperature seems
too low or too high.
The oven was not preheated as
the recipe calls for.
The recipe has never been
tested or is not from
a
reliable
source.
Level range. (See Installation Instruc-
tions.)
Your old oven may have shifted gradually
while your new oven may be more exact.
lf, after using the oven, you are not
satisfied with the temperature settings,
they can be adjusted by an authorized
WhirlpoolSU service technician. (See “If
you need service” on page 23.)
Preheat oven if called for in recipe.
Use only tested recipes from a reliable
source.
The pans are not the type or size Refer to
a
reliable cookbook for recom-
recommended in the recipe. mended pan type and size.
There is not proper air circulation Allow 1% to 2 inches (4-5 cm) on all sides
around pan when baking. of the pans for air circulation.
Flame size does not fit the Adjust flame size to fit cooking utensil.
cooking utensil being used.
When broiling, you have not Completely close broiler drawer.
completely closed the broiler
drawer.
22