When Auto Set TIME ends,
“End” will show on the
Display and 4 beeps will
sound. (You can stop the
beeping by opening the
door or by touching CAN-
CEL.) “End” will remain on
the Display and a reminder
tone will sound every 60
seconds (to remind you
that food is left in the oven)
until the door is opened or
CANCEL is touched. The
Display will then show the
time of day
NOTE: You can set COOK 1, COOK 1 and 2 and/or PROBE TEMP to follow Auto
Set TIME. (See pages 14-17 for instructions.)
Changing the Pre-programmed Setting You can change the pre-programmed cooking time and Cook Power in
Auto Set TIME to the time and power you most often use. To change the Auto
Set TIME setting, follow these steps:
1. Open the door.
2. Touch TIME twice.
3. Touch the Number Pads for the new desired cooking time. If HIGH Cook
Power is desired, skip to Step 6.
4. Touch COOK POWER.
5. Touch the Number Pad for the desired Cook Power.
6. Touch START. Touch CANCEL. The oven will remember that cooking time
and Cook Power for future use. NOTE: If the electric power ever goes off,
the oven will go back to the pre-programmed 2 minutes, 30 seconds
at HIGH Cook Power.
Auto Set TEMP Auto Set TEMP provides ten preset probe temperature settings. One hundred
ten (110) to one hundred ninety (190) degrees at 70% Cook Power can be
selected by touching TEMP and the corresponding Number Pad (l-9). You
don’t need to touch any additional Number Pads. This provides a short-cut
method for setting commonly used probe temperatures.
The Auto Set Chart included with your microwave oven and the Auto Set
Guide on the inner door panel help you use Auto Set TEMP to cook various
food items without having to look up the temperature.
A preset temperature of 165°F at HIGH Cook Power is available after inserting
the probe, by touching just the TEMP Pad. This temperature may be changed
to any temperature from 90°F to 200°F allowing you to store your favorite
cooking temperature and Cook Power, or to pre-program the oven for some-
one else to cook an already prepared dish at a latertime. See page 21 for
instructions.
continued on next page
19