sound. (You can stop the
beeping by opening the
door or by touching
CANCEL.) “End” will remain
on the Display and a re-
minder tone will sound
every 60 seconds (to re-
mind you that food is left in
the oven] until the door is
opened or CANCEL is
touched. The Display will
then show the time of day.
NOTE: If the oven light and fan come on when you touch START, the Start
Time feature has not been set correctly. Touch CANCEL, reprogram the
cooking sequence and START TIME, then touch START.
Additional Information
l
Additional cycles can be set when using START TIME to start cooking at a
later time. Follow instructions under the proper heading (Using AUTO SET,
Cooking with the Temperature Probe, Defrosting, Using KEEP WARM before
you program START TIME.
l
You can change time, or add cycles at any time during the Start Time
cycle.
I. Touch the cycle you wish to change or add.
2. Touch Number Pads for new time.
3. Touch COOK POWER, if desired.
4. Touch number of new Cook Power, or touch COOK POWER again if High
is desired.
5. Touch START. The oven will cook at the new time and Cook Power,
l
Opening the door does not stop the START TIME operation.
To avold sickness and food waste when using delay start:
l
Do not use foods that will spoil while waiting for cooking to start, such
as dishes wlth milk or eggs, cream soups, and cooked meats or fish.
Any food that has to wait for cooking to start should be very cold or
frozen before It is put in the oven. MOST UNFROZEN FCODS SHOULD
NEVER STAND MORE THAN TWO HOURS BEFORE COOKING STARTS.
l
Do not use foods contalnlng baking powder or yeast when using
delay start. They will not rise properly.
l
Do not allow food to remain in oven for more than two hours after end
of cooking cycle.