Number Pads
Once you’ve touched a Command Pad to tell the oven what
you want to do, you’ll touch Number Pads to tell it...
- a time,
-a Cook Power,
- a food temperature,
-a food setting.
Audible Signals Audible signals are available to guide you when setting and using your oven.
(A programming tone will sound each time you touch a pad. Two beeps will
sound between cycles. A reminder tone will sound every 60 seconds after
cooking is done to remind you that something has been left in the oven. A 3
second tone signals the end of the Minute Timer function.) If you don’t hear a
tone, it is because of incorrectly entered instructions or because the tones
have been removed. For example, a tone will not sound if you touch a
Number Pad before you touch a Command Pad.
To remove the
programming tone:
1. Open the door.
2. Touch CANCEL
twice, then touch
START.
3. The programming
tone will be
cancelled.
To replace the
programming tone:
l
Repeat the steps
above.
To remove all tones,
except the Minute
Timer signal:
1. Open the door.
2. Touch CANCEL
twice, touch 0, then
touch START.
3. All audible tones
(except Minute Timer
signal) will be
cancelled.
To replace the tones:
l
Repeat the steps
above.
NOTE: If your electricity
goes off, the audible
signals will come back
on. Repeat steps
above if you want to
remove them again.
8