Lighting Standing Pilots
To light Cooktop Pilots:
1.Remove the grates and reflector pans from cooktop. Remove the cooktop. (See page 13.)
2.Make sure all controls are OFF.
To light Oven Burner Pilot:
1.Make sure the Oven Temp control knob is OFF.
2.Remove the broiler drawer.
Slide drawer out to stops, lift both sides, then slide the rest of the way out.
3.To light, hold a lit match over the pilot light located between the front and back burners. The pilot flame should be ?‘At0 % in
4.If the pilot flame needs adjust- ment, turn the pilot adjustment screw on the manifold pipe.
5.Replace the cooktop and replace the grates before using the sur- face burners.
3.Hold a lit match overthe oven burner pilot located at the rear of the burner.
4.After the oven burner pilot is burning steady, check burner lighting by turning the Oven Temp control knob to a tem- perature abovel40”F (60°C). The burner will take 5060 seconds to light.
5.Replace the broiler drawer.