Changing the Light Bulb

To change the refrigerator light:

1.Unplug refrigerator or disconnect power.

2.Reach behind the Control Panel and remove the bulb.

3.Replace the bulb with a 40-watt appliance bulb.

4.Plug in refrigerator or reconnect power.

NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to replace the bulb with one of the same size and shape.

TOOL NEEDED: 5⁄16-inch hex-head socket wrench, No. 2 Phillips screwdriver, flat-head screwdriver, 1⁄2-inch open- end wrench.

SUGGESTION: Reversing the door swing should be performed by a qualified person.

•Before you begin, turn refrigerator OFF, unplug it, and remove any food from door shelves.

•When removing hinges, keep doors closed until ready to lift free from cabinet.

•To remove doors, start at the top hinge and work your way down.

•To replace doors, start at the bottom hinge and work your way up.

•Line up doors so they are centered between the sides of the cabinet and parallel with each other.

•Seal all unused openings with screws or plastic plugs. Moisture will enter any openings.

NOTE: After the doors are reversed, reinstall the handles. If the doors are not shutting on their own, see the “Door Closing and Alignment” section.

TOP HINGE

Cover

Screws

Top hinge

Spacer

Screws

CENTER HINGE

Door stop

Spacer

Shim

Hinge Pin

Screws

Spacer

Hinge

Bracket

BOTTOM HINGE

Door stop

Spacer

Screw

Shim

Hinge pin

Screws

Plug

continued on next page