ENSURING PROPER AIR CIRCULATION
In order to ensure proper temperatures, you need to permit air flow between the two sections. As shown in the illustration, cool air enters through the bottom of the freezer section (1) and moves up. Most of the air then flows through the freezer section vents (2) and recirculates
under the freezer floor (3). The rest of the air enters the1 fresh section through the top vent (4).
Do not block any of these vents (1, 2, 3, or 4) with food packages. If the vents are blocked, air flow will be prevented and temperature and moisture problems may occur.
IMPORTANT: Because air circulates between both sections, any odors formed in one section will transfer to the other. You must thoroughly clean both sections to eliminate odors. To prevent odor transfer and drying out of food, wrap or cover foods tightly. (See the “Food Storage Guide” section for details.)
2
3
1
4
REMOVING THE DROP-IN DOOR TRIM
To remove the trim piece:
1.Remove all items from the shelf.
2.Pull straight up on each end of the trim piece.
To replace the trim piece:
1.Locate each end of the trim piece above the trim pocket opening.
2.Push the trim ends straight down until they stop.
3.Replace items on the shelf.
10
