5.Install charcoal filter on rear of metal filter with metal wires provided in filter packaging.
To replace the metal grease filters:
A
C
B 
A. Metal wires
B. Charcoal filter
C. Metal filter
6.Insert back edge of filter into rear track of the filter opening.
7.Push handle toward the rear and push filter up.
8.Pull filter toward the front and insert into front track.
To replace charcoal filter
1.Turn blower and lights off.
2.Remove the metal grease filters by pushing handle toward the rear and pull downward.
3.Pull filter toward front.
4.Set the filter face down on a protective cover such as a towel.
5.Remove metal wires and clean or discard charcoal filter.
6.Install cleaned or replacement charcoal filter on rear of metal filter with metal wires provided in filter packaging.
To replace the metal grease filters:
7.Insert back edge of filter into rear track of the filter opening.
8.Push handle toward the rear and push filter up.
9.Pull filter toward the front and insert into front track.
Replacing a lamp
Disconnect the hood from electricity and be sure the lights are cool.
If new lights do not operate, make sure the lamps are inserted correctly before calling service.
1.Use a flat bladed screwdriver and gently pry the light cover loose.
2.Remove the lamp and replace with a
3.Replace the light cover.
Accessories
Replacement Charcoal Filter | Part Number 4396850 |
12
