3
INSTALLATION REQUIREMENTS

Toolsand Parts

Gather the required tools and parts before starting installation.
The parts supplied are in the washer basket.

T

ools needed for connecting the drain hose and water

inletho ses:

NOTE: Replace inlet hoses after 5 years of use to reduce the risk
of hose failure. Record hose installation or replacement dates for
future reference.

Partssupplied:

Tools needed for securing the drain hose and leveling

thewasher:

Alternate Parts

Your installation may require additional parts. If you are interested
in purchasing one of the items listed here, call the toll-free
number on the cover or in the “Assistance or Service” section.
Pliers that open to 1 "
(39.5mm)
Flashlight (optional)
A.Drain hose form
B.Water inlet hoses (2)
C.Flat water inlet hose washers (4)
D.Beaded tie strap
Adjustable or open end
wrench " (14mm)
Level
Woodblock
Ruler ormeasuring tape
AB
C
D
If You H ave: You Will Need to Buy:
Laundry tub or
standpipe taller
than 96" (2.4 m)
Sump pump system (if not already
available)
1" (25mm)
diameter standpipe
2" (50 mm) diameter to 1” (25 mm)
diameter standpipe adapter,
PartNumber 3363920 and connector kit
Part Number285835
Overhead sewer Standard 20 gal. (76 L) 39" (990 mm) tall
drain tub or utility sink, sump pump and
connectors (available from local
plumbing suppliers)
Floor drain Siphon break, PartNumber 285834;
additional drain hose,
Part Number 8318155 and connector kit,
PartNumber 285835
Water faucets
beyond reach of fill
hoses
2longer water fill hoses:
6ft (1.8 m) Part Number 76314,
10ft (3.0 m) Part Number 350008
Lint clogged drain Drain protector, PartNumber 367031
9⁄16
9⁄16