9.Install the 4 - #10 x ⁵⁄₈" mounting screws in pilot holes. Leave about ¹⁄₄" (6.4 cm) space between screw heads and cabinet to slide range hood into place.

¹⁄₄"

(6.4 mm)

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

10.For Direct Wire Installations:

■Disconnect power.

■Install a UL listed or CSA approved strain relief.

A

A. UL listed or CSA approved strain relief

■Pull about 12" (30 cm) of wire through wall or cabinet and into opening.

For Power Supply Installations:

■Follow instructions included with power supply cord kit marked for range hoods.

11.Using 2 people, lift range hood into final position, feeding electrical wire through wiring opening. Position the range hood so that the large end of the keyhole slots are over the screws. Then push the hood toward the wall so that the screws are in the neck of the slots. Tighten mounting screws to cabinet, making sure mounting screws are in narrow neck of slots.

12.Check that damper, if used, rotates up and down freely.

13.For Vented Installations Only:

Connect ventwork to hood. Seal joints with clamps to make secure and airtight.

Make Electrical Connection

1.Run 3 wires, black, white, green or bare through strain relief, into terminal box. Use caulking to seal openings.

A B

C

D

F E D A

A. White wires

B. Black wires

C. UL listed wire connectors

D. Ground wires

E. UL listed or CSA approved strain relief

F. Green ground screws

2.Use UL listed wire connectors and connect the 4 white wires

(A) together (2 wires from the range hood controls, 1 wire from the range hood motor, and 1 wire from the home supply cable).

3.Use UL listed wire connectors and connect black wires (B) together.

WARNING

Fire Hazard

Electrically ground the blower.

Use copper wire.

Connect ground wire to green ground screw in terminal box.

Failure to do so can result in death, fire, or electrical shock.

4.Connect the 2 ground wires (D) (green or bare) of home power supply and range hood to the green ground screws (F) in the terminal box.

5.Tighten strain relief screws.

6.Install the terminal box cover.

7.Reconnect power.

10

Page 9 Page 11
Page 10
Image 10
Whirlpool W10240582A, 99044506A Make Electrical Connection, For Power Supply Installations, For Vented Installations Only
Page 9 Page 11

99044506A, W10240582A specifications

The Whirlpool W10240582A and 99044506A represent two key components in home appliance functionality, as they are essential parts for Whirlpool refrigerators. These models are designed to enhance the efficiency and performance of your appliance, ensuring that your food and beverages remain fresh and properly stored.

One of the main features of both models is their compatibility with a wide range of Whirlpool refrigerator models, making them versatile components for consumers. This adaptability allows homeowners to easily replace old or malfunctioning parts without needing to purchase a completely new unit, ultimately saving time and money.

The W10240582A is known for its high-quality construction, which emphasizes durability and longevity. This part is often an essential component in the ice-making function of the refrigerator. By providing efficient ice production, the W10240582A ensures that users have a constant supply of ice for cooling beverages, making it an ideal choice for families and social gatherings.

On the other hand, the 99044506A is designed to optimize temperature control within the refrigerator. It serves as a thermostat, ensuring that the appliance maintains the ideal cooling temperature for food preservation. This technology is crucial not only for preventing food spoilage but also for energy efficiency, as a well-regulated cooling system uses less power, contributing to lower utility bills.

Both models showcase Whirlpool's commitment to innovation and user-friendliness. They are designed for easy installation, allowing even those with minimal technical skills to replace them without professional help. The clear instructions provided with these parts further simplify the process, making it accessible for the average homeowner.

In terms of characteristics, the W10240582A and 99044506A are both backed by Whirlpool's reputation for quality. They are engineered to meet rigorous safety and performance standards, ensuring reliable operation over time. Additionally, these components often come with warranty options, reflecting the brand’s confidence in their longevity and performance.

Overall, the Whirlpool W10240582A and 99044506A serve as excellent examples of how replacement parts can significantly enhance the functionality of household appliances. With their advanced features and compatibility, they play a vital role in maintaining the efficiency and effectiveness of Whirlpool refrigerators.
Top Page Image Contents