![](/images/new-backgrounds/1064889/6488915x1.webp)
Wall Venting
To make a 4" x 10½" (10.2 cm x 26.7 cm) rectangle in the wall:
1.Make 2 lines by measuring from floor 65⁷⁄₈" (167.3 cm) and 62³⁄₈" (158.4 cm) or ¹⁄₈" (3.2 mm) and 3⁵⁄₈" (9.2 cm) down from underside of cabinet and mark on the centerline on the back wall.
2.Mark lines 5¼" (13.3 cm) to the right and left of the centerline on the wall.
3.Use saber or keyhole saw to cut a rectangular opening in the wall for the vent.
Centerline |
Cabinet |
front |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ¹⁄₈" |
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
| ||||||
|
| (3.2 mm) |
|
|
|
|
|
|
| |||||
|
| ⁵⁄₈" |
|
|
|
|
|
|
| |||||
3 |
|
|
|
|
| 5 ¹⁄₄" | ||||||||
(9.2 cm) |
|
|
|
| (13.3 cm) | |||||||||
|
|
| ||||||||||||
|
|
|
Style 2 - Cut Openings for 3¼" x 10" (8.3 x 25.4 cm) Rectangular Vent to 7" (17.8 cm) Round Vent Transition
Roof Venting
To make a 4" x 10½" (10.2 x 26.7 cm) rectangular cutout on the underside of cabinet bottom:
1.Mark lines 1½" (3.8 cm) and 5½" (14.0 cm) from the back wall on the centerline of the underside of cabinet.
2.Mark lines 5¼" (13.3 cm) to the right and left of the centerline on the underside of cabinet.
3.Use saber or keyhole saw to cut a rectangular opening for
vent.
*1¹/₂" (3.8 cm)
*5¹/₂"
(14 cm) 5¹/₄"
5¹/₄" (13.3 cm)
(13.3 cm)
*From wall, not cabinet frame
To make a circular vent opening on the underside of the cabinet top:
1.Mark a centerline on the underside of the top of cabinet.
2.Mark a line 5" (12.7 cm) from the back wall on the underside of the top of cabinet.
3.Use a compass or a circle template to draw a circle with a diameter that is ¼" (0.64 cm) larger than the vent.
4.Use saber or keyhole saw to cut the circular vent opening.
Circular vent opening
*5" |
(12.7 cm) |
Cabinet cutouts
*From wall, not cabinet frame
Install Vent System
1.Install vent through the vent opening in upper cabinet or wall. Complete venting system according to the selected venting method. See “Venting Requirements” section.
2.Use caulking to seal exterior wall or roof opening around the cap.
Install Range Hood
1.Remove bottom cover screws and bottom cover.
A A
B
A. Bottom cover screws
B. Bottom cover
2.Remove filters. See “Range Hood Care” section.
3.Remove terminal box cover.
A
B
A
A. Terminal box cover screws
B. Terminal box cover
8