FLEXI-FOLD DOWN™ Flexible Tines
The row of tines on the
To adjust the
1.Grasp the tip of the tine that is in the tine holder.
2. Gently push the tine out of the holder.
3. Lay the tines down, toward the center of the rack.
NOTE: The bottom rack may also have 1 or 2 rows of flexible tines located in the back of the rack. Follow the same instructions to adjust.
SURE-HOLD® Light Item Clips
The light item clips hold lightweight plastic items such as cups, lids, or bowls in place during washing.
To move a clip:
1. Pull the clip up and off the tine.
2. Reposition the clip on another tine.
Premium Adjustable 2-Position Top Rack
After removing the culinary tool rack, you can raise or lower the top rack to fit tall items in either the top or bottom rack. Adjusters are located on each side of the top rack. Each adjuster has 2 preset positions.
To raise the rack, press both rack adjusters and lift the rack until it is in the Up position and level.
To lower the rack,
Removable Top Rack (for SatinGlide® Max rails)
The removable top rack allows you to wash larger items such as pots, roasters, and cookie sheets in the bottom rack.
IMPORTANT: Remove dishes prior to removing the top rack from the dishwasher.
To remove the rack:
To gain access to the removable tabs on the tracks/rails, pull the upper
rack forward about halfway out of the tub.
On one side, press the tab on the track in and pull up the front end of the rack out of the track. Then repeat this step on the other side to completely remove the front end of the rack.
Then remove the back end of the rack, by pulling the back end out with a slightly forward, and then upward motion.
To replace the rack:
Pull the tracks forward about halfway out of the tub.
Along the sides of the racks are round attachment tabs. Align the rack's back end attachment tabs with the cutout in the track. Push down into place.
Pull the tracks completely out, and align the rack's front end attachment tabs with the cutout in the track. Push down into place. You will hear a snap when the front end of the rack is secured into place on each side.
Removable Culinary Tool Rack (3rd level rack)
press both rack adjusters and slide the rack to its Down position and level.
The removable culinary tool rack (3rd level rack) allows you to wash larger items in the upper rack, or remove both the culinary tool rack and top rack to wash larger times in the lower rack. See “Removable Top Rack” section.
To remove the rack:
1.To access track stops, pull the rack forward until it stops and clicks into place.
A
B
A. Track stop
B. Track
Removable Top Rack (for SatinGlide® rails)
The removable top rack allows you to wash larger items such as pots, roasters, and cookie sheets in the bottom rack.
IMPORTANT: Remove dishes prior to removing the top rack from dishwasher.
To remove the rack
To gain access to the track stops, pull the upper rack forward about halfway out of the tub.
To open, flip the track stop toward the outside of the tub. After opening both track stops, pull top rack out of the rails.
2.To open track stops, flip the track stop to the outside of the track.
3.After opening both track stops, slide front wheels up and out of the slot in track. Continue to pull rack forward in track and slide the back wheels up and out of the track.
4.Close track stops.
5.Slide rack tracks back into dishwasher.
To replace the rack:
1.Gently pull rack tracks forward in dishwasher until they stop and click into place.
2.To open track stops, flip the track stop to the outside of the track.
3.Place the back rack rollers on each side of the rack into the track slot and roll the rack back into the tracks.
4.Insert front rack rollers on each side of the rack into the rack slots.
5.Close track stops on both sides of rack and slide rack back into dishwasher.
Track stop closed | Track stop open |
12
