Whirlpool W10300929B Quick Steps, Dishwasher Use, Prepare and load dishwasher, STEP Add Detergent

Models: W10300929B

1 40
Download 40 pages 31.72 Kb
Page 6
Image 6
1 Prepare and load dishwasher.

1 Prepare and load dishwasher.

2 Add detergent for cleaning and rinse aid for drying.

Quick Steps

3 Select a cycle and option.

4 Start dishwasher.

NOTE: If the Start/Resume button is located on the top of door, push door firmly closed within 3 seconds of pressing START/RESUME.

Dishwasher Use

STEP 1

Prepare and Load the Dishwasher

IMPORTANT: Remove leftover food, bones, toothpicks and other hard items from the dishes. Remove labels from containers before washing.

Upper rack

Lower rack

Make sure nothing keeps spray arm(s) from

spinning freely. It is important for the water spray to reach all soiled surfaces.

Make sure that when the dishwasher door is closed no items are blocking the detergent dispenser.

Items should be loaded with soiled surfaces facing down and inward to the spray as shown. This will improve cleaning and drying results.

Avoid overlapping items like bowls or plates that may trap food.

Place plastics, small plates and glasses in the upper rack. Wash only plastic items marked “dishwasher safe.”

To avoid thumping/clattering noises during operation, load dishes so they do not touch one another. Make sure lightweight load items are secured in the racks.

Improper loading can cause dishes to be chipped or damaged. When loading glasses or mugs, it is best to load these items in between rows of tines instead of loading them over tines, as shown in the image above.

When loading silverware, always place sharp

items pointing down. Mix items in each section of the basket with some pointing up and some down to avoid nesting. Spray cannot reach nested items.

STEP 2

Add Detergent

NOTE: If you do not plan to run a wash cycle soon, run a rinse cycle. Do not use detergent.

Use automatic dishwasher detergent only. Add powder, liquid or tablet detergent just before starting a cycle.

Fresh automatic

A

 

dishwasher detergent

 

 

 

results in better

Hard Water

Hard Water

cleaning. Store tightly

Soft Water

Soft Water

B

closed detergent

C

 

container in a cool, dry

 

PRE-

MAIN WASH

WASH

place.

A. Cover latch

B. Main Wash section

C. Pre-Wash section

The amount of detergent to use depends on:

How much soil remains on the items - Heavily soiled loads require more detergent.

The hardness of the water - If you use too little in hard water, dishes won't be clean. If you use too much in soft water, glassware will etch.

Soft to Medium Water (0-6 grains per U.S. gallon) [typical water softener water and some city water]

Medium to Hard Water (7-12 grains per U.S. gallon) [well water and some city water]

Depending on your water hardness, fill the Main Wash section of the dispenser as shown. Fill the Pre-Wash section to the level shown, if needed.

6

Page 6
Image 6
Whirlpool W10300929B Quick Steps, Dishwasher Use, Prepare and load dishwasher, STEP Prepare and Load the Dishwasher