Whirlpool W10435039A Make Power Supply Cord Connection, Option A, Power Supply Cord

Using 2 or more people, grasp sides of dishwasher door frame and place dishwasher on its back.

Using a flat-blade screwdriver, turn the plastic fasteners ¹₄ turn to unlock them. Remove panel. Do not remove tech sheet from access panel.

Using a ¹₄ " hex head socket, nut driver or Torx® T20® screwdriver, remove terminal box cover. Retain for later use.

Install a UL Listed/CSA Approved strain relief. Make sure screw heads are facing to the left when tightening conduit nut. Strain relief is provided with the power supply cord kit.

NOTE: If using Option B, proceed to “Determine Cabinet Opening,” to continue with the installation of your dishwasher.

Make Power Supply Cord Connection

Option A, Power Supply Cord:

Route cord so that it does not touch dishwasher motor to lower part of dishwasher tub. Pull cord through strain relief in terminal box.

12